Catia Tutorial Electrical Harness Installation

Technique

Read or Download Catia Tutorial Electrical Harness Installation PDF

Similar technique books

Woodworking Shopnotes 036 - Miter Trimmer

Each web page of ShopNotes journal will make you a greater woodworker, since you get extra woodworking plans, extra woodworking concepts, extra woodworking jigs, and extra approximately woodworking instruments — and never a unmarried advert. For greater than 25 years, woodworkers have became to ShopNotes for the main certain woodworking plans and woodworking counsel on hand wherever.

Advances in Crystal Growth Inhibition Technologies

During this booklet, educational researchers and technologists will locate very important details at the interplay of polymeric and non-polymeric inhibitors with numerous scale forming crystals such as calcium phosphates, calcium carbonate, calcium oxalates, barium sulfate, calcium pyrophosphates, and calcium phosphonates.

Extra info for Catia Tutorial Electrical Harness Installation

Example text

When the female connector is selected, the electrical link is displayed in the Related Objects viewer. 14. From the catalog, drag and drop the backshell_M directly onto the connector_M of the power cable. This action places the back shell from the catalog onto the power cable connector. The assembly constraints as well as the electrical constraints have been created between the connector and the back shell. You can repeat this step to place back shells on the extension cable male connectors (at the other extremity).

Start the Electrical Harness Assembly workbench to create the bundle segments for the power and extension cables. htm (9 of 12) [05/16/2001 17:34:18] Electrical Workbenches Integration To do so: Define a bundle segment in the Geometrical Bundle1(PowerCable): (Diameter = 10mm, Bend Radius = 15mm, Slack = 10%) Define a point in the Geometrical Bundle2(ExtensionCable): (Mode Between + Middle) Define a bundle segment in the Geometrical Bundle2(ExtensionCable): (Diameter = 10mm, Bend Radius = 15mm, Slack = 5%) Define their routes.

How to display the electrical connection? htm (1 of 3) [05/16/2001 17:33:40] Disconnecting... 1. Click the Related Objects icon . 2. Select the bundle segment you have just disconnected: Bundle Segment1 You can see that the connector is no longer connected. htm (2 of 3) [05/16/2001 17:33:40] Disconnecting... For more information, refer to Viewing Related Objects. htm (3 of 3) [05/16/2001 17:33:40] Routing Bundle Segments in Support Routing Bundle Segments into a Support These functionalities are only available in the Electrical Harness Assembly workbench.

Download PDF sample

Rated 4.58 of 5 – based on 32 votes